Cisco ASR 900 Series Route Switch Processor Data Sheet

Data Sheet

Available Languages

Download Options

  • PDF
    (1.1 MB)
    View with Adobe Reader on a variety of devices
Updated:June 13, 2024

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Available Languages

Download Options

  • PDF
    (1.1 MB)
    View with Adobe Reader on a variety of devices
Updated:June 13, 2024
 

 

Centralized network timing. Control plane and data plane elements. The Cisco® ASR 900 Route Switch Processor (RSP) is the powerful centralized engine that provides these features and more for Cisco ASR 900 Series routers. The ASR 900 Series RSPs (Figures 1–3) address the requirements of converged service provider networks, from Carrier Ethernet technologies to advanced services such as Multiprotocol Label Switching (MPLS). Its three models help providers add innovative traffic management and intelligent packet-switching and routing features. The models include the Cisco ASR 900 Series Route Switch Processor 1 (RSP1A/B), the Cisco ASR 900 Series Route Switch Processor 2 (RSP2A), and the Cisco ASR 900 Series Route Switch Processor 3 (RSP3C).

Product overview

The Cisco ASR 900 Series RSP modules contain separate control plane and data plane components. These include the main control plane CPU for the Cisco IOS® Software operating system and platform control software. The data-plane packet processing and traffic management is performed by the Carrier Ethernet Application-Specific Integrated Circuit (ASIC).

Related image, diagram or screenshot

Figure 1.               

Cisco ASR 902 and ASR 903 Route Switch Processor 1B, Route Switch Processor 2A

Related image, diagram or screenshot

Figure 2.               

Cisco ASR 902 and ASR 903 Route Switch Processor 3C

Related image, diagram or screenshot

Figure 3.               

Cisco ASR 907 Route Switch Processor 3C

Features and benefits

Feature

Benefit

Carrier Ethernet ASIC

Delivers essential Carrier Ethernet technologies such as Hierarchical Quality of Service (HQoS), IPv4, IPv6, MPLS/flex LSP, and hierarchical virtual private LAN services (HVPLS). It provides line-rate performance and incorporates innovative traffic management capabilities while providing intelligent packet switching and routing operations.

Service enhancement

Provides advanced per-traffic-class metering and offer bidirectional packet-count and byte-count statistics. The service offering is enhanced with Operations, Administration, and Maintenance (OAM) functionality that includes Layer 2 Connectivity Fault Management (CFM), IP Service-Level Agreements (IP SLAs) for Layer 3, and MPLS OAM.

Service scale

Provides flexible service scalability in a small footprint delivering high performance and scale for point-to-point and multipoint services, accommodating the requirements from the most demanding wireline and wireless applications.

Clocking and timing services

Offers integrated support for the Global Navigation Satellite System (GNSS), Building Integrated Timing Supply (BITS), 10 MHz, 1 Pulse Per Second (1 PPS), and Time of Day (TOD) interfaces, crucial functions required in a modern unified network. As the central system clocking and timing functions for the ASR 900 Series platform, the Cisco ASR 900 RSPs support Synchronous Ethernet (SyncE) and IEEE 1588-2008 and can act as the clock source for network clocking of Time-Division Multiplexing (TDM) and SDH/SONET interfaces.

The ASR 900 Series can act as an IEEE 1588-2008 ordinary clock, boundary clock, end-to-end transparent clock, and primary clock function in an IEEE 1588-2008 timing domain.

High availability and modularity

Delivers optional intrachassis hardware redundancy for all hardware components and supports software redundancy with In-Service Software Upgrade (ISSU) support when a pair of route switch processors is inserted in the Cisco ASR 900 system chassis fully modular platform.

With two RSPs inserted in the Cisco ASR 903 or in the Cisco ASR 907 systems, one RSP operates in active mode, and the other RSP operates in hot standby mode. The Cisco ASR 900 RSP is a Field-Replaceable Unit (FRU), and it can be Online Inserted and Removed (OIR) while the Cisco ASR 900 system is operating. The removal or failure of the active RSP in the Cisco ASR 900 system results in the automatic switchover to the standby RSP.

Management interfaces

Contains the Out-of-Band (OOB) management interfaces for the system. To offer flexible access to the router, a variety of interfaces are available for management access to the platform, including a dual-mode console port that functions as either a USB console or a serial console port.

In addition to the serial console access, the Cisco ASR 900 RSP contains an Ethernet management port that has no interaction with actual Carrier Ethernet ASIC traffic. In addition to the OOB control interfaces, a USB port can connect USB flash devices for loading Cisco IOS® Software images and configurations on the platform.

Fully distributed and unique packet/circuit capabilities for converged access networks

The Cisco ASR 902/903 Route Switch Processor 1 (RSP1A/B) is compatible with the following interface modules:

(Please refer to the RSP1A/B End-of-Sale Announcement)

     Cisco ASR 900 Series 1-Port 10GE XFP Module: supports a single 10-Gigabit Ethernet Small Form-Factor Pluggable (XFP) port.

     Cisco ASR 900 Series 8-Port 1GE RJ45 Module: supports eight copper RJ-45 Gigabit Ethernet ports.

     Cisco ASR 900 Series 8-Port 1GE SFP Module: supports eight Gigabit Ethernet Small Form-Factor Pluggable (SFP) ports.

     Cisco ASR 900 Series 14-Port Serial Module: supports 14 serial ports. The 14 ports are composed of six 12-in-1 connectors with support for asynchronous RS-232 interfaces using EIA/TIA-232 DB-25 connectors and two 68-pin connectors, which support up to 8 RS-232 and RS-485 interfaces in full- or half-duplex mode using four RS-232 connectors (DB-25, DB-9, or RJ-45).

     Cisco ASR 900 Series 16-Port T1/E1 Module: supports 16 T1 or E1 ports. The port type is software configurable per interface module. Mixing T1 and E1 ports on a single interface module is not supported.

     Cisco ASR 900 Series 4-Port OC3/STM1 or 1-Port OC12/STM4 Module: This combination module is designed to be software configurable in four modes: 4xOC-3, 4xSTM-1, 1xOC12, and 1xSTM-4. If the module is configured for 4xOC-3 or 4xSTM-1, then the individual interfaces can be configured to be clear channel, POS, or channelized in any combination. Support of these modes is software dependent as described in the Cisco IOS XE Software for Cisco ASR 900 Series Router data sheet.

The Cisco ASR 902/903 Route Switch Processor 2 (RSP2A) is compatible with all the interface modules that are supported by the Cisco ASR 903 Route Switch Processor 1 (RSP1). In addition, this second-generation RSP is compatible with the following interface modules: (Also refer to the Cisco ASR 900 Series Interface Modules Data sheet for Slot compatibility Matrix)

     Cisco ASR 900 Series 2-Port 10GE XFP/SFP+ Module: This module supports two 10-Gigabit Ethernet ports. Each individual port can be used as either an XFP port or as a Small Form-Factor Pluggable Plus (SFP+) port.

     Cisco ASR 900 Series 8-Port 1GE RJ45 and 1-port 10GE SFP+ Module: supports eight copper RJ-45 Gigabit Ethernet ports and one SFP+ port.

     Cisco ASR 900 Series 8-Port 1GE SFP and 1-port 10GE SFP+ Module: supports eight Gigabit Ethernet SFP ports and one SFP+ port.

     Cisco ASR 900 Series 8-Port T1/E1 Module: supports 8 T1 or E1 ports. The port type is software configurable per interface module. Mixing T1 and E1 ports on a single interface module is not supported.

     Cisco ASR 900 Series 16-Port T1/E1 Module: supports 16 T1 or E1 ports. The port type is software configurable per interface module. Mixing T1 and E1 ports on a single interface module is not supported.

     Cisco ASR 900 Series 32-Port T1/E1 Module: supports 32 T1 or E1 ports. The port type is software configurable per interface module. Mixing T1 and E1 ports on a single interface module is not supported.

     Cisco ASR 900 Series 12-Port T1/E1 + 4-port DS3/E3 + 4-port OC3/STM-1 or 4-port OC12/STM-4 or 1-Port OC48/STM-16 Module (A900-IMA3G-IMSG).

The Cisco ASR 903/907 Route Switch Processor 3 (RSP3C) is compatible with the following multiple Ethernet and TDM/SONET/SDH interface modules: (Also refer to the Cisco ASR 900 Series Interface Modules Datasheet for Slot Compatibility Matrix)

     Cisco ASR 900 Series 1-Port 100GE CPAK Module: This module supports one 100 Gigabit Ethernet CPAK port.

     Cisco ASR 900 Series 2-Port 40GE QSFP Module: This module supports two QSFP ports.

     Cisco ASR 900 Series 8-Port 10GE SFP+ Module: This module supports eight SFP+ ports.

     Cisco ASR 900 Series 48-Port T1/E1 CEM Module: supports 48 T1 or E1 ports. The port type is software configurable per interface module. Mixing T1 and E1 ports on a single interface module is not supported.

     Cisco ASR 900 Series 48-Port T3/E3 CEM Module: supports 48 T3 or E3 ports. The port type is software configurable per interface module. Mixing T3 and E3 ports on a single interface module is not supported.

     Cisco ASR 900 Series 1-Port 10G (OCn/STM-n) and 8-Port 1G (OCn/STMn) CEM and OTN Module: This combination module is designed to be software configurable in different modes: 1 x OC192/STM-64 or either 4xOC48/STM-16, 8xOC3/STM-1, or 8xOC12/STM-4.

     Cisco ASR 900 Series 12-Port T1/E1 + 4-port DS3/E3 + 4-port OC3/STM-1 or 4-port OC12/STM-4 or 1-Port OC48/STM-16 Module (A900-IMA3G-IMSG).

The Cisco ASR 900 Series RSP3C also supports a Global Navigation Satellite System (GNSS) module that allows direct interface to external antennas. The GNSS module is able to support several satellite systems, such as the Global Positioning System (GPS), GLONASS, BEIDU, QZSS, SBAS, and GALILEO.

The Cisco ASR 900 Series RSP3C is available in two different sizes in order to support the differences in form factors of the ASR 900 chassis types. The capabilities of the different form factors are identical, and the software is identical as well. The wide form-factor RSP engine (A900-RSP3C-400-W) is supported in the ASR 907 chassis, while the small form-factor RSP engine (A900-RSP3C-400-S) is supported in the ASR 903 chassis.

The ASR 900 interface module support is dependent on the combination of the RSP, the chassis, software version, and the interface module slot. The Cisco ASR 900 Series Interface Modules Datasheet contains the compatibility matrix for the several combinations.

Industry-leading, carrier-class Cisco IOS Software

The ASR 900 Series systems are supported in Cisco IOS XE Software. The Cisco IOS XE Software is designed to provide modular packaging, feature velocity, and powerful resiliency.

The Cisco IOS XE software provides scale and serviceability for service providers by:

     Supporting the complete set of Cisco IOS Software features for a consistent experience

     Scaling advanced service delivery without affecting system performance

     Integrating applications in the network, improving security, reliability, and simplicity

     Facilitating programmability for cloud service orchestration

The software support for the Cisco ASR 903 Chassis was added in Cisco IOS XE Software Release 3.5.0S, and the support for the Cisco ASR 902 Chassis was added in Cisco IOS XE Software Release 3.12.0S. The support for Cisco ASR 900 Series RSP2A was added in Cisco IOS XE Software Release 3.13.0S, with the support for Cisco ASR 900 Series RSP3C being added in Cisco IOS XE Software Release 3.16.1S.

The software support for the TDM/CEM modules with Cisco ASR 900 Series RSP3C was added in Cisco IOS XE Software Release 3.18SP.

Product specifications

Tables 1 through 4 list the product specifications and compliance information for the Cisco ASR 900 RSP modules. Individual modules are identified by product number.

Table 1.                 Cisco ASR 900 RSP product specifications

Product ID

A900-RSP3C-200-S

A900-RSP3C-400-S

A900-RSP3C-400-W

A900-RSP2A-64

A900-RSP2A-128

A903-RSP1A-55

A903-RSP1B-55

Power consumption of chassis with 2 power supplies, 1 fan tray, and 1 RSP

340W

A900-RSP3C-400-S: 440W

A900-RSP3C-400-W: 480W

A900-RSP2A-64: 120W

A900-RSP2A-128: 180W

A903-RSP1A-55: 195W

A903-RSP1B-55: 210W

RSP memory (DRAM)

8 GB

8 GB

4 GB

A903-RSP1A-55: 2 GB

A903-RSP1B-55: 4 GB

Flash memory (storage)

8 GB

8 GB

2 GB

2 GB

Service scale1, 2, 3

Large

Large

Base

A903-RSP1A-55: Base

A903-RSP1B-55: Large

Ethernet interface module compatibility4

A900-IMA2F

A900-IMA8Z

A900-IMA2Z

A900-IMA1X

A900-IMA8S

A900-IMA8S1Z

A900-IMA8T

A900-IMA8T1Z

A900-IMA1C

A900-IMA2F

A900-IMA8Z

A900-IMA2Z

A900-IMA1X

A900-IMA8S

A900-IMA8S1Z

A900-IMA8T

A900-IMA8T1Z

A900-IMA1Z8S-CXMS

A900-IMA1X

A900-IMA2Z

A900-IMA8S

A900-IMA8S1Z

A900-IMA8T

A900-IMA8T1Z

A900-IMA1X

A900-IMA8S

A900-IMA8T

TDM and ATM interface module compatibility4

A900-IMA1Z8S-CX

A900-IMA1Z8S-CX

A900-IMA48D-C

A900-IMA48T-C

A900-IMA3G-IMSG

A900-IMA1Z8S-CXMS

A900-IMA8D

A900-IMA16D

A900-IMA32D

A900-IMA4OS

A900-IMASER14A/S

A900-IMA3G-IMSG (RSP2A-128)

A900-IMA16D

A900-IMA4OS

A900-IMASER14A/S

Maximum transmission unit (MTU)

Configurable MTU of up to 9216 bytes, for bridging on Gigabit Ethernet, 10 and 100 Gigabit Ethernet

Maximum interface throughput5

240 Gbps

480 Gbps

A900-RSP2A-64: 64 Gbps

A900-RSP2A-128: 128 Gbps

55 Gbps

IP version 4 performance

300 Mpps

600 Mpps

A900-RSP2A-64: 95 Mpps

A900-RSP2A-128: 180 Mpps

65 Mpps

IP version 6 performance

300 Mpps

600 Mpps

A900-RSP2A-64: 95 Mpps

A900-RSP2A-128: 180 Mpps

65 Mpps

Management ports

Copper 10/100/1000Base-T LAN management port - RJ45 connector port

Console/Aux RS232 serial ports - RJ45 connector port

Console - USB 2.0 type A receptacle connector port

Timing ports6

BITS simultaneous input and output (J1/T1/E1) - RJ48 connector port

1 pps input - mini-coax connector port

1 pps output - mini-coax connector port

2.048/10 MHz input - mini-coax connector port

2.048/10 MHz output - mini-coax connector port

External USB flash memory

Mass storage - USB 2.0 type A receptacle connector port

Shipment package size in inches (LxWxH)

14.38x14.38x6.25

A900-RSP3C-400-S:

14.38x14.38x6.25

A900-RSP3C-400-W:

21.75x15.75x6.56

14.38x14.38x6.25

14.38x14.38x6.25

Shipment package weight

6.2 lbs.

A900-RSP3C-400-S:

6.2 lbs.

A900-RSP3C-400-W:

7.0 lbs.

6.2 lbs.

6.2 lbs.

MTBF at 104°F (40°C) operating temperature

230,000 hours

230,000 hours

400,000 hours

300,000 hours

1 Not all services can be scaled at maximum scale concurrently (multidimensional service scale). The numbers are unidirectional scale numbers.
2 The scale numbers are hardware capabilities. The actual scale might be limited in a specific software release and only become available in a future software release.
4 Interface module and protocol support is dependent on software version, RSP version, chassis, and slot number combinations. See release notes for more details.
5 Higher combined interface bandwidth may be accepted in the router configuration, though beyond the maximum interface throughput the functionality of the router cannot be guaranteed. Oversubscription of RSP1 and RSP2 is not supported. Oversubscription for RSP3 is a roadmap item. See release notes for more details.
6 J1 BITS clocking mode is dependent on software version and might only be supported in future software releases.
7 The new A900-IMA1Z8S-CXMS module requires at least software release 16.12.1.

Table 2.                 Maximum Single-Dimensional Service Scale1,2,3,4

Product ID

A900-RSP3C-200-S

A900-RSP3C-400-S

A900-RSP3C-400-W

A900-RSP2A-64

A900-RSP2A-128

A903-RSP1A-55

A903-RSP1B-55

MAC addresses

200,000

16,000

16,000

256,000

Bridge domains

8,000

4,000

4,000

4,000

Ethernet flow points

5,000

3,998

3,998

8,000

L3 interfaces

1,000

1,000

256

1,000

IPv4 routes

256,000

20,000

20,000

80,000

IPv6 routes

12,000

4,000

6,000

6000

Multicast routes

4,000

1,000

1,000

8,000

MPLS VPN

1,000

128

128

1,000

MPLS labels

32,000

15,994

15,994

64,000

EoMPLS tunnels per system

8,000

4,000

2,000

8,000

VPLS instances

4,000

2,000

2,000

4,000

Queues

48,000

A900-RSP2A-64: 4,000

A900-RSP2A-128: 8,000

4,000

32,000

Classifications

24,000

A900-RSP2A-64: 5,000

A900-RSP2A-128: 10,000

5,000

24,000

Ingress policers

24,000

A900-RSP2A-64: 3,000

A900-RSP2A-128: 6,000

2,000

16,000

Class maps

1,000

1,000

1,000

4,000

Queue counters (packet and byte)

240,000

A900-RSP2A-64: 4,000

A900-RSP2A-128: 8,000

4,000

128,000

Policer counters (packet and byte)

72,000

A900-RSP2A-64: 9,000

A900-RSP2A-128: 18,000

6,000

96,000

IPv4 ACL entries4

1,000

1,500

1,500

16,000

BFD sessions

1,023

1,000

511

511

IEEE 802.1ag (CFM) at 3.3ms interval

1,024

1,000

256

256

1 Not all services can be scaled at maximum scale concurrently (multidimensional service scale). The numbers above are unidirectional scale numbers.
2 The scale numbers are hardware capabilities. The actual scale might be limited in a specific software release and only become available in a future software release.
4 Maximum 500 access control entries per ACL.

Table 3.                 Environmental Specifications

 

Cisco ASR 900 Series System

Operating environment and altitude1

–40 to 65°C operating temperature (DC operation, with the 900W or 1200W power supplies)

–40 to 65°C operating temperature (AC operation, with the 1200W power supplies)

–5 to 50°C operating temperature (AC operation, with the 550W power supplies)

–60 to 1800m operating altitude (for full operating temperature range)

Up to 4000m operating altitude (at up to 40°C temperature)

Outside plant

For an outside plant installation, it is required that the system be protected against airborne contaminants, dust, moisture, insects, pests, corrosive gases, polluted air, or other reactive elements present in the outside air. To achieve this level of protection, it is recommended that the unit be installed in a fully sealed enclosure. Examples of such cabinets include IP65 cabinets with heat exchanger complying with Telcordia GR487.

Relative humidity

5 to 95%, noncondensing

Acoustic noise2

Acoustic noise peak operation complies with Network Equipment Building Standards (NEBS) GR-63-Core Issue 4 sound power level of 78 dB at 27°C operation as measured by the ANSI S12.10/ISO 7779 NAIS noise measurement test standard.

Storage environment

Temperature: –40 to 70°C altitude: 15,000 ft. (4570m)

Seismic

Zone 4

Hazardous substances

Reduction of Hazardous Substances (ROHS) 6

1 Minimum temperature range of chassis, fan tray, RSP engine, power supply, optics, and interface modules will dictate the supported operating temperature range. Maximum cooling fan tray module is assumed.
2 The above values are for normal (nonfailure) operation. When operating with a fan failure, the above may be exceeded.

Table 4.                 Safety and Compliance

Type

Standards

Safety

  UL 60950-1, 2 nd edition
  CAN/CSA C22.2 No. 60950-1-07 2 nd edition
  IEC 60950-1, 2 nd edition
  EN 60950-1, 2 nd edition
  AS/NZS 60950.1:2003

Electromagnetic

  FCC CFR47 Part 15 Class A

Emissions compliance

  EN55022, class A
  CISPR22, class A
  ICES-003, class A
  EN 300 386, class A
  VCCI, class A
  KN22, class A
  EN61000-3-2 to EN61000-3-3

Immunity compliance

  EN 300 386
  EN 61000-6-1
  EN 50082-1
  CISPR24
  EN 55024
  KN 24
  EN 50121-4
  EN/KN 61000-4-2 to EN/KN 61000-4-6
  EN/KN 61000-4-8
  EN/KN 61000-4-11

NEBS

  GR-63-CORE Issue 3
  GR-1089-CORE Issue 5
  SR-3580 NEBS Level 3

ETSI

  ETS/EN 300 119 Part 4
  ETS/EN 300 019 - Storage: Class 1.2, Transportation: Class 2.3, In-Use/Operational: Class 3.2
  ETS/EN 300 753

Network synchronization

  GNSS
  ANSI T1.101
  GR-1244-CORE
  GR-253-CORE
  ITU-T G.813
  ITU-T G.823
  ITU-T G.824
  ITU-T G.703 clause 5
  ITU-T G.703 clause 9
  ITU-T G.8261/Y.1361
  ITU-T G.781
  ITU-T G.8262
  ITU-T G.8264
  ITU-T G.8265.1
  ITU-T G.8275.1
  IEEE1588-2008

Ordering information

Table 5 describes the Cisco IOS XE Software universal consolidated packages supported on the system, which include all Cisco IOS XE Software functionalities and features enabled. Table 6 lists the hardware parts available for Cisco ASR 900 RSP modules. (Also refer to the Cisco IOS XE Software for Cisco ASR 900 Series Aggregation Datasheet for latest release information).

Table 5.                 Universal Cisco IOS XE Software Packages for Cisco ASR 900 RSP Modules

Cisco IOS XE Consolidated Package

Part Number

Description

Cisco ASR 903 Series RSP1 IOS XE – No Payload Encryption

SA903R1NPEK9318SP

  Provides a consolidated software package for RSP1
  Includes SSH and SNMPv3 support but not dataplane encryption support

Cisco ASR 900 Series RSP2 IOS XE – No Payload Encryption

SASR900R2NPEK9169

  Provides a consolidated software package for RSP2
  Includes SSH and SNMPv3 support but not dataplane encryption support

Cisco ASR 900 Series RSP3 IOS XE – No Payload Encryption

SASR900R3NPEK9169

  Provides a consolidated software package for RSP3
  Includes SSH and SNMPv3 support but not dataplane encryption support

Cisco ASR 900 Series RSP3 IOS XE – Payload Encryption

SASR900R3K9169

  Provides a consolidated software package for RSP3
  Includes SSH, SNMPv3, and dataplane encryption support

Table 6.                 Hardware Components for Cisco ASR 900 RSP Modules

Part Number

Description

A903-RSP1A-55

ASR 903 Route Switch Processor 1, Base Scale

A903-RSP1A-55=

ASR 903 Route Switch Processor 1, Base Scale, spare

A903-RSP1B-55

ASR 903 Route Switch Processor 1, Large Scale

A903-RSP1B-55=

ASR 903 Route Switch Processor 1, Large Scale, spare

A900-RSP2A-64

ASR 900 Route Switch Processor 2 - 64G, Base Scale

A900-RSP2A-64=

ASR 900 Route Switch Processor 2 - 64G, Base Scale, spare

A900-RSP2A-128

ASR 900 Route Switch Processor 2 - 128G, Base Scale

A900-RSP2A-128=

ASR 900 Route Switch Processor 2 - 128G, Base Scale, spare

A900-RSP3C-200-S

ASR 900 Route Switch Processor 3 - 200G, Large Scale

A900-RSP3C-200-S=

ASR 900 Route Switch Processor 3 - 200G, Large Scale, spare

A900-RSP3C-400-S

ASR 903 Router and Switching Processor and Controller - 400G

A900-RSP3C-400-S=

ASR 903 Router and Switching Processor and Controller - 400G, spare

A900-RSP3C-400-W

ASR 907 Router and Switching Processor and Controller - 400G

A900-RSP3C-400-W=

ASR 907 Router and Switching Processor and Controller - 400G, spare

A900-CM-GNSS

ASR 900 Global Navigation Satellite System Module

A900-CM-GNSS=

ASR 900 Global Navigation Satellite System Module, spare

Cisco ASR 900 RSP Accessories

A90X-RSPA-BLANK=

ASR 90X Route Switch Processor Type-A Blank Cover, spare

A90X-RSPB-BLANK=

ASR 90X Route Switch Processor Type-B Blank Cover, spare

Warranty information

Warranty information is available on Cisco.com at the Product Warranties page.

Service and support

Cisco offers a wide range of services programs to help accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, promoting high levels of customer satisfaction. Cisco Services help you protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business. For more information about Cisco Services, refer to Cisco Technical Support Services or Cisco Advanced Services.

Cisco is committed to reducing your total cost of ownership. Cisco offers a portfolio of technical support services to help ensure that Cisco products operate efficiently, remain highly available, and benefit from the most up-to-date system software. The services and support programs described in Table 7 are available as part of the Cisco Carrier Ethernet Switching Service and Support solution and are available directly from Cisco and through resellers.

Table 7.                 Service and support

Advanced Services

Features

Benefits

Cisco Total Implementation Solutions (TIS), available directly from Cisco

Cisco Packaged TIS, available through resellers

  Project management
  Site survey, configuration, and deployment
  Installation, text, and cutover
  Training
  Major moves, adds, and changes
  Design review and product staging
  Supplement existing staff
  Help ensure functions meet needs
  Mitigate risk

Cisco SP Base Support and Service Provider-Based Onsite Support, available directly from Cisco

Cisco Packaged Service Provider-Based Support, available through resellers

  24-hour access to software updates
  Web access to technical repositories
  Telephone support through the Cisco Technical Assistance Center (TAC)
  Advance replacement of hardware parts
  Facilitate proactive or expedited problem resolution
  Lower total cost of ownership by taking advantage of Cisco expertise and knowledge
  Reduce network downtime

Cisco Capital

Flexible payment solutions to help you achieve your objectives

Cisco Capital makes it easier to get the right technology to achieve your objectives, enable business transformation and help you stay competitive. We can help you reduce the total cost of ownership, conserve capital, and accelerate growth. In more than 100 countries, our flexible payment solutions can help you acquire hardware, software, services and complementary third-party equipment in easy, predictable payments. Learn more.

Document history

New or revised topic

Described in

Date

IPv4 routes and IPv6 routes

Table 2

June, 2024

 

Learn more